Archive for the ‘Energy’ Category

Professor John R. R. Searl

January 6, 2014

Professor John R. R. Searl is the founder
of the Searl Effect Technology and the inventor of the Searl Effect Generator (SEG).

With our World in the midst of an emerging energy crisis along with massive and constant environmental damage from forest destruction to ever-increasing greenhouse gas emissions
of epic and catastrophic proportions.

Prof. John Searl offers a global solution that can harness economically clean, sustainable
and unlimited renewable energy.

“Nothing is impossible,

  except that the state of your mind makes it so”

Prof John R.R. Searl

The Searl Effect

An SEG video animation of the innermost set of parts assembling.

The Searl Effect was discovered by John Roy Robert Searl in 1946.

Put simply, it is a method of extracting clean and sustainable electrical energy.

The SEG consists of three fixed stator rings that are uniquely magnetized with patterns setup to generate continual motion of similarly magnetized cylindrical rotors. The magnetic rotors or rollers consist of eight segmented components made of the same four layers of concentric materials that make up the stators. The rollers have both freedom of spin and rotation around the stator which generates both mechanical and electrical power.

The SEG is an ‘open system’ of energy conversion that is in accordance with known thermodynamic laws; particularly as it may apply at the quantum level. The open energy cycle of the SEG enables it to function both as a prime mover of mechanical rotors, but more so as an electrical generator that continuously interacts and processes energy from the natural environment.

Incidental effects includes a halo of negative air ionization or plasma, vacuum by extreme electrical charge, cooling temperatures of both device and the local environment; also gravitational and inertial anomalies under specific conditions.

The Searl Effect is based on magnetic waveforms that generates a continual motion of magnetized rollers around magnetized rings.

Energy conversion while operating involves processing of random quantum fluctuations and kinetic energy within the atomic lattice into coherent currents of electron pairs formed between two-dimensional boundaries of different type materials. Therein between surface boundaries, the Quantum Hall Effect of a strong pulsing magnetic field are electron transformations (compression) that dramatically decreases the device temperature with increasing mean free paths (conductivity) due to the increase in fermion pair formations or bosons tunneling through all of the concentric material layers of the Searl Effect Generator.

Energy out of the environment is typically chaotic but pervasive at the quantum level and we all feel it in part as ambient temperatures, but this is just one source of ambient energy within the electromagnetic spectrum that is in a random state and is readily utilized by the SEG. It is in effect an unbiased solid state magnetic diode that can effectively turn ambient energy into asymmetrical electron motion out of randomness into a uniform state or non-random state of coherent currents, consisting of high velocity tunneling electrons pairs with photon like characteristics.

Searl Technology effectively utilizes quantum kinetic energy which involves the electron’s inherent ability to absorb and emit energy at the quantum level with an energy cycle that can could compared and explained in layman terms to the hydroelectric dam in principle since both are driven directly or indirectly by entropy of the sun’s radiant energy. A dam builds up potential and kinetic energy by way of cloud condensation that forms rain and fills reservoirs, but does so only after it has achieved a higher energy level by way of evaporation from ground levels. Whereas the SEG utilizes its layer of neodymium as a reservoir of electrons, Teflon layer is analogous to the dam itself, Magnetic layer as the power plant that makes useful work out of the currents and finally the copper layer that compares well to the water outlets that can be seen to jet out at the bottom of the dam; similarly the SEG ram-jets electrons out to the atmosphere. At this point, energy levels of the water jets or in the case of electrons, are kinetically reduced existing the system, but be mindful that these discharges go back to the environment to recharge. Therein, ambient energy restores their energy levels up by way of evaporation of water or as with the SEG, the uniform emission of electrons to the outside air exposes them to atmosphere’s ambient sources of energy or temperature which raises the electron’s quantum energy levels back up to natural ambient levels. Thereafter, the external sources of electrons are attracted back to the relatively positive potential of the electron depleted neodymium layer (reservoir) where the energy cycle continuously repeats. It is a process that effectively strips kinetic energy out the of electrons before they are emitted; no different in principle from the energy cycle of the hydroelectric dam where the kinetics of the water flow are harnessed. In this manner, both ways gather ambient sources of energy that can be processed and made useful for electrical applications.

The idea of utilizing unlimited sources of energy is the subject of various devices and experiments, most of which prove the existence of energy at the quantum level but not a method of creating a coherent and uniform flow of energy to produce useful electrical power. In contrast, John Searl discovered that in order to create a steady and stable flow, all the masses of the device (and the stimulating frequencies) must conform to precise values which are determined by a matrix of coherent numbers he calls the “Law of the Squares”. The SEG’s ability harness the electron’s kinetic energy itself is a unique achievement that represents a new technology working with the highest quality of energy that nature has to offer and it is clean, non-destructive, unlimited and all-pervading.

This all describes a constant source of energy that can be made to flow when the correctly proportioned masses concerned are stimulated by suitable magnetic field frequencies along with the appropriate generator design. The SEG is such a device, precisely constructed to these principles, enabling it to produce stable and useful electrical power that is scalable in size for output requirement.

The size of an SEG can range from the smallest design of about one meter in diameter of 15 kilowatt capacity (which is suitable for most households) to well over a megawatt. They can be setup in tandem to make up a power plant to supply the electrical needs of an entire city.

The Searl Technology has all the hallmarks of a world-class solution for today’s energy needs and it is expected to be the dominant form of energy production of the future.

When a distinguished but elderly scientist states that

  something is possible, he is almost certainly right.

  When he states that something is impossible,

  he is very probably wrong.”

                                                        Arthur C. Clarke (1917 – 2008), Clarke’s first law

        Searl Effect Generator (SEG)

This slow motion animation depicts the SEG fully assembled & operating.

The Searl Effect Generator (SEG) functions along the principles of a linear induction motor (LIM), but designed around a circular track for continuous motion of movable rotors. It is a magnetic prime mover of electromagnetic multi-phased cylindrical rollers over fixed stator rings and free of any mechanical wear or friction.

The SEG’s stators and rollers are magnetic components uniquely magnetized or imprinted with matching magnetic pole patterns.

While the neodymium layer serves as a source or reservoir of electroncharges that are drawn out by electromagnetic induction. These redial currents though the rollers makes for mechnical motion at right angles to both the electric and magnetic fields.

The SEG configuration of rollers in motion, cuts through the magnetic flux with a unique cycloid pattern that is superimposed over an orbit around the circumference of the stator. In this manner, each roller can also induce eddy currents of mutual induction between the copper surfaces to form a frictionless ‘magnetic bearing’ as it generates radial electrical potentials. Frictionless operation enables the SEG to operate without physical wear and thus enabling it to operate with a service expectancy of a lifetime.

Technical Definition of a Surface Operating SEG

A Plate cross-sectional view showing the four material component layers

The generator consists of three stator rings (called Plates) that are composed of four distinctively different materials concentrically layered to each other and fixed to a base. Surrounding each of the Plates is rotors (called rollers) constructed with the same materials but are free to rotate around the Plates. The inner most Plate typically has 12 rollers, 22 on the second stage and 32 on the final Plate. Surrounding the outer most rollers are conventional electromagnets, which by way of magnetic induction taps energy out of the rapid passing of magnetized rollers. These inductive pickup coils are connected in various configurations to supply AC power at a variety of desired voltage and current levels to suit residential or industrial applications.

The SEG is defined as a device constructed of 2,124 component parts that make up 3 plates and 66 roller sets. 12 of the 2,124 components make the 3 plates that act as reaction components. 2,112 components are employed to create 66 roller sets that also act as active components. Each roller set consists of 8 segments constructed from 32 components.

Each segment cannot be less than 34 grams in weight, as the law of the squares defines that value as the lowest value suitable for the reasonable generation of electricity. Therefore the smallest roller set must weigh 272 grams, making a grand total of 2,244 grams per roller set for the smallest surface bound SEG.

The SEG is a step up rotary transformer. In fact it’s a ‘three rotary transformers’ operational system, within the whole unit. The inner transformer output is fed in to the input of the second plate which increases the output of the second unit, which output feeds as an input to the final unit, thereby increasing its final output to a very high voltage. The output windings can be designed to step down the output to a standard 240 volts at the rate of about 15 Kilowatts for a home unit.

From 1946 up to 1968 the Searl Effect was referred to as magnetic bubbles in motion as it was explained in John’s early newsletters. In 1968, it became clear that these magnetic bubbles contained particles in a set manner and that there was a set pattern to how many bubbles were present in the material. Because of this finding, Searl dropped the term ‘magnetic bubbles’ and replace it with the term ‘magnetic quantum material’ and released these details in a newsletter which has since been reproduced in one of Searl’s books a few years ago. A laboratory examination also agrees that somehow the material changes its state when produced in this manner.

When the rollers are brought into close proximity to the SEG plate,

the Searl Effect resonant magnetic field causes electrons to be drawn

into and accelerated through the machine. This process is assisted by

the highly electron-attracting or capturing effect of the neodymium layer.

The unique mechanical and material arrangement of the SEG pulses the neodymium to continually release and replace the surplus electrons that provides both mechanical and electrical power.

View here a video demonstration of the unit (Courtesy of the Searl team).

This SEG mockup is a recent development towards a working prototype which demonstrates many of the core principles of the SEG in motion.

“You can not have different matter in the same space,

 but you can have different matter in different spaces at the same time,

 or have different matter in the same space at different times.”

                                                                      Prof. John R.R. Searl

The Law of the Squares

The history of Magic or Latin squares dates back thousands of years, to the pyramids of ancient Egypt, and possibly even further back to the first Chinese dynasties. In fact, today, the Chinese people still use magic squares for cutting and trimming bonsai trees to the correct mathematical ratios of nature. By understanding these natural laws, one can argue that the Universe exist according to precise mathematical laws.

The Law of the Squares (LOS) or Magic Squares is not a new technology but an old technology that’s been reborn after John Searl at a young age developed it independently and discovered his numbered matrix has three dimensional properties that can model the quantum energy states of mass in time and space.
There are three groups of squares – group one, two and three, and there can be no others. Group one squares consists of all odd numbers. All even numbers that are divisible by four are in group two. All the rest of the even numbers not divisible by four are in group three.

When the correct matrix of random numbers sum up to the same line value across, down and diagonally, then it is just as valid as the physics regarding the known laws of conservation where energy is neither created nor destroyed, but can be converted from one form to another.

The LOS matrix demonstrates these conservative laws precisely by correctly transposing the random numbers of the squares into line values that all add up to the same value in any direction results in a non-random or uniform state of summation without creating more or less value than the total sum of the cube.

LOS technology along with appropriate stimulation is a transformational solution to random quantum energy state conversion into a useful non-random (uniform) state of resonance and coherent electron motion within the atomic lattice or simply put, can form electrical currents out of chaos.

Note: The First law  of thermodynamics states that both work and heat are forms of energy, and that the total energy is conserved as the LOS matrix illustrates with its exacting summation; the SEG functions in complete accordance to this law.

Also note: Where as the Second law of thermodynamics states that in a “‘closed system” disorder grows and less energy is available for work. The SEG functions on the bases of an “open system” as is life, windmills, hydroelectric’s, solar cells, etc.

Fact of the matter is the 2nd law does NOT apply  to “open systems”; it is a typical mistake by self-proclaimed experts to say otherwise about the SEG’s energy cycle.

Square four is graphically illustrated 3 dimensionally; added in any direction sums 34.

The kernel of the square is the 2×2 cube which represents the core of the square.

Click on the image or here to view the transposition from random to uniform results.

For an SEG to work effectively, the various materials or elements must be of a specific nature, weights and dimensions. Also, it must be configured in such a way that it meets the LOS requirements with a high level of material precision based on strict mathematical design criteria.

Professor John Searl has written many books on the subject of The Law of the Squares and he uses these square matrices and their laws to construct the Searl Effect Generator. He has explained the Law of the Square’s unique properties and has traveled extensively to lectures about it at schools, conventions and universities of many countries.

The following are examples of the Truth Tables for Squares 4 thru 25;

they are excerpts from one of his series of books.

Click here to watch a video where Prof. Searl works out the Squares at the 2010 Tesla conference.

Technical Documents

Prof. John Searl’s listed series of online book parts.

SEARL TECHNOLOGY UPDATE PART 01      SEARL TECHNOLOGY UPDATE PART 02

SEARL TECHNOLOGY UPDATE PART 03      SEARL TECHNOLOGY UPDATE PART 04

SEARL TECHNOLOGY UPDATE PART 05      SEARL TECHNOLOGY UPDATE PART 06A

SEARL TECHNOLOGY UPDATE PART 06B    SEARL TECHNOLOGY UPDATE PART 07

SEARL TECHNOLOGY UPDATE PART 08      SEARL TECHNOLOGY UPDATE PART 09A

SEARL TECHNOLOGY UPDATE PART 09B    SEARL TECHNOLOGY UPDATE PART 09C

SEARL TECHNOLOGY UPDATE PART 10      SEARL TECHNOLOGY UPDATE PART 11

SE ARL TECHNOLOGY UPDATE PART 12     SEARL TECHNOLOGY UPDATE PART 13

SEARL TECHNOLOGY UPDATE PART 14A    SEARL TECHNOLOGY UPDATE PART 14B

SEARL TECHNOLOGY UPDATE PART 15A    SEARL TECHNOLOGY UPDATE PART 15B

SEARL TECHNOLOGY UPDATE PART 16A    SEARL TECHNOLOGY UPDATE PART 16B

SEARL TECHNOLOGY UPDATE PART 16C    SEARL TECHNOLOGY UPDATE PART 16D

SEARL TECHNOLOGY UPDATE PART 16E    SEARL TECHNOLOGY UPDATE PART 16F

SEARL TECHNOLOGY UPDATE PART 16G    SEARL TECHNOLOGY UPDATE PART 16H

SEARL TECHNOLOGY UPDATE PART 16I     SEARL TECHNOLOGY UPDATE PART 16J

SEARL TECHNOLOGY UPDATE PART 17A    SEARL TECHNOLOGY UPDATE PART 17B

SEARL TECHNOLOGY UPDATE PART 17C    SEARL TECHNOLOGY UPDATE PART 17D

SEARL TECHNOLOGY UPDATE PART 17E    SEARL TECHNOLOGY UPDATE PART 17F

SEARL TECHNOLOGY UPDATE PART 17G    SEARL TECHNOLOGY UPDATE PART 17H

SEARL TECHNOLOGY UPDATE PART 17I     SEARL TECHNOLOGY UPDATE PART 17J

 

SEARL TECHNOLOGY UPDATE PART 18      SEARL TECHNOLOGY UPDATE PART 18B

SEARL TECHNOLOGY UPDATE PART 18C    SEARL TECHNOLOGY UPDATE PART 18D

SEARL TECHNOLOGY UPDATE PART 18E    SEARL TECHNOLOGY UPDATE PART 18F

SEARL TECHNOLOGY UPDATE PART 18G

 

Searl Technology: Chapter1 – DC electronics

Searl Technology: Chapter2 – DC electronics

Advertisements

GASLAND and the Shale gas fracking disasters,

June 6, 2013

Shale gas: Energy solution or Fracking Hell? This prospect is being touted as the next big thing in energy solutions yet the danger to the local water supply is enormous and documented. Around the UK stations are set up to test sites most unknown. What does this mean to you? These wells are pumping toxins into the ground forming cracks that allow seepage into the water supply and in some cases sending gas through your water pipes as this excellent video shows. This is incredibly dangerous and I do recommend watching this video to give you an idea of what actually is the result. Look out for Gasland 2 another expose.

Here is a animation that describes the effects of Shale gas on a community . This process is extremely destructive and services only greed. If you are unfortunate enough to be close to such a facility you should seek compensation because your property will be worthless once it starts.

Published on Jul 18, 2013
Unconventional gas exploration is threatening Britain and Ireland. Licenses and planning applications have already been granted by the Government with little or no community consultation. The scale of the industrialisation and impacts are never discussed.This film charts Doreen and John’s journey from the shock of the drill rigs arrival to the sickening realisation that their lives and the lives of their family and friends will be profoundly affected. They live in Lancashire within sight of a shale gas well that is scheduled for hydraulic fracturing.

Like Doreen and John, individuals and communities across the UK are realising that the only way to stop this industry is to inform and empower their community and stand together for a better future.

Saying “No” to unconventional gas opens up many alternatives. Saying “Yes” or doing nothing leaves us facing a future where we are still dependent on fossil fuels with polluted air and water, and thousands of leaking gas wells across the countryside.

Find out how this will affect you, your family and your community. Find out how you can take action to stop the industrialisation of the countryside, pollution of air and water and plan for a better future. You can make a difference. A strong well organised community is the best defence against this industry.
https://www.youtube.com/watch?v=BYniYtJEeeI&feature=player_embedded

Don’t FRACK Our Future – Doreen’s Story

http://www.youtube.com

Unconventional gas exploration is threatening Britain and Ireland. Licenses and planning
The chemicals used in fracking operations, from extraction to processing, distribution, transport and waste disposal, can pollute surrounding air and water. These harmful chemicals pose serious health risks to surrounding communities, and in particular to pregnant women and children. Just some of the harmful substances commonly used in fracking include methane, BTEX (benzene, toluene, ethylbenzene and xylenes), arsenic, radium, ozone, formaldehyde, radium, radon, nitrogen oxides, methylene chloride and silica sand. These substances are associated with low birth weight, birth defects, respiratory problems, cancer and fertility problems.Link : http://ecowatch.com/2013/report-fracking-health-risks-pregnant-women-children/